E-Grip III is a revolutionary zero-VOC adhesive. The low odor, one-component urethane adhesive is formulated specifically for use with ECORE’s family of surfacing products. It features excellent trowability and improved tack properties, making it easy to apply while creating flat, concealed seams. E-Grip III has been specifically engineered to be solvent-free. With a moisture-cured, no mix, non-sag and permanently elastic formula, it provides excellent adhesion to elastomers, concrete, and wood in both indoor and outdoor applications.
E-Grip III flooring adhesive also meets the Collaborative for High Performance Schools (CHPS) criteria (section 01350) for indoor air quality in classrooms, as described in the state of California’s Department of Health Services Standard Practice. The emission test followed the California Department of Health Services “Standard Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale Environmental Chambers.” Commonly referred to as the CA Section 01350 protocol.
Due to its zero-VOC1 content, E-Grip III adhesive meets all indoor environmental quality standards for low emitting materials and can potentially contribute 1 point toward Leadership in Energy and Environmental Design (LEED) certification.
E-Grip III is available in 2 gallon pails, 4 gallon pails and 10.1 ounce cartridges.
All ECOsurfaces rubber flooring products (rolls, tiles, pavers and underlayments) can be installed using a 1/16” or 1/8” square notch trowel, dependent upon the application and product selected. Please refer to the Technical Manual for the recommended trowel size.
For ECOsurfaces 3.2mm (1/8”) product, a 1/16” x 1/32” x 5/64” U-Notched Trowel should be utilized.
Coverage Rate: 95 Sq Ft per gallon using 1/16” notched trowel
BENEFITS
